Stainless Steel EP tube
Designation: TP316L控硫 (S:0.005~0.012)
Standards: ASTM A269& SEMEI F20-0706E, JIS G3459& SEMI F20-0706E,SEMI F19-0304,ASME BPE-2012
Size :
1、Ordinary BPE GRADE EP Tube:
Raw Materials are from YONGXING, Baosteel,TISCO
Inner surface roughness<Ra0.25um,clean washing.
Package : both end with caps and two-layer plastic bag after clearing & fulled with nitrogen gas in dust-fress room. (General gas pipeline use.)
2、Clean HP GRADE EP Tube:
Raw materials are imported or domestic vacuum metling (VIM) from domestic mills.
Inner surface roughness<Ra0.2um.
Electrolytic layer Cr/Fe ≥1.5 after electrochemical polishing & clean wash.
The thickness of the oxide layer is greater than or equal to 1.5nm, the CPT critical pitting temperature is greater than 25°C, and the resistivity is greater than or equal to 18 megohms after ultrapure water cleaning.
Package: both end with caps and two-layer plastic bag and after full with nitrogen gas in dust-free room. (Special gas pipeline use.)
2、Ultra-Pure UHP GRADE EP Tube:
Raw materials are imported or domestic vacuum metling(VIM+VAR)
Inner surface roughness<Ra0.125um
Electrolytic layer Cr/Fe ≥1.5 after electrochemical polishing & clean wash
The thickness of the oxide layer is greater than or equal to 1.5nm, the CPT critical pitting temperature is greater than 30°C, and the resistivity is greater than or equal to 18 megohms after ultrapure water cleaning.
Package :both end with caps and two-lays plastic bag after clearing & fulled with nitrogen in dust-free room. (Special high purity corrosive gas pipeline use.)
Add: Building C, No. 888, west huanhu second road, nanhui new town, pudong new area, Shanghai Tel:15821616610